How to start windows 10 in safe mode

If you’re a Windows 10 user, you probably know that old methods of booting the system into Safe Mode won’t work. Unfortunately, simply pressing F8 while the OS is booting won’t help you at all. This method stopped working due to the fact that the latest version of Windows boots much, much faster than the previous ones.

Now, this doesn’t mean Windows 10 has no Safe Mode – of course it does – you just need to use different methods to boot it. There are, in fact, a few different methods of booting your system into Safe Mode. If you have problems booting the Safe Mode – worry not, we’re here to help. Without further ado, here are seven different ways you can do it.

About the Safe Mode

In Safe Mode, your computer is running with non-core components disabled which makes it easier to fix potential errors or remove various software that, in normal conditions, can’t be fixed or removed.

If you boot into Safe Mode, you can use various diagnostic tools:

  • System Restore
  • Various settings for your Windows version
  • Device Manager, where you can update and remove devices and drivers from your computer
  • Event Viewer
  • System Information, where you can view information about the hardware
  • Command Prompt
  • Registry Editor

For more information on how to run these diagnostic tools, go to Diagnostic tools in Safe Mode.

In Windows XP, the Windows Advanced Options Menu shows the Safe Mode option available:

Advanced Options Menu in Windows XP

Advanced Options Menu in Windows XP

Usually, you can choose from 3 options: Safe Mode, Safe Mode with Networking and Safe Mode With Command Prompt:

  • Safe Mode
  • Safe Mode with Networking
  • Safe Mode with Command Prompt

In Windows Vista, the equivalent of Windows Advanced Options Menu of Windows XP, the Advanced Boot Options, also lists the 3 options available for Safe Mode:

Advanced Options Menu in Windows Vista

Advanced Options Menu in Windows Vista

Windows 7 is the same:

Advanced Options Menu in Windows 7

Advanced Options Menu in Windows 7

Windows 8 has the same options, but the interface is different:

Startup Settings screen in Windows 8

Startup Settings screen in Windows 8

And the Windows 10 screen is slightly different as well:

Startup Settings screen in Windows 10

Startup Settings screen in Windows 10

Options

The Safe Mode of Windows has 3 options available:

  • Safe Mode. This is the most used option. It gives you a minimal set of devices, drivers and services to run Windows
  • Safe Mode with Networking. This loads the same devices, drivers and services as the Safe Mode option with the additional drivers necessary to load networking.
  • Safe Mode with Command Prompt. This option loads the same drivers and services as the Safe Mode option, but loads Command Prompt (cmd.exe) instead of Windows Explorer (graphical interface)

How to boot into Safe Mode

To boot into Safe Mode, you need to press the F8 key while your Windows is booting, but before the logo appears.

For Windows 8 and Windows 10, the combination of Shift and F8 keys might work, but it work for computers with UEFI/EFI.

For Windows-specific steps, follow the steps below.

Safe Mode in Windows XP

For Windows XP to start in Safe Mode, follow these steps:

  1. Reboot your computer. It’s recommended to remove all external cables and media and leave only the essentials: monitor, keyboard, mouse etc.
  2. Press the F8 key as your Windows starts, before the Windows XP logo appears
  3. The Windows Advanced Options Menu should now appear
  4. Choose Safe Mode
  5. Hit Enter

Advanced Options Menu in Windows XP

Advanced Options Menu in Windows XP

Safe Mode in Windows Vista

For Windows Vista to start in Safe Mode, follow these steps:

  1. Remove all CDs, DVDs or USBs from your computer. Make sure you don’t have any printers, scanners etc. connect
  2. Reboot the computer
  3. Press F8 as your computer start. You need to press this button before the Windows Vista logo appears.If you have more than 1 operating system, use the arrows keys to select which operating system you want to boot into Safe Mode and press Enter.
  4. At the Advanced Boot Options, use the arrows keys to select Safe Mode
  5. Press Enter
  6. Login in as an administrator, if prompted to do so

Advanced Options Menu in Windows Vista

Advanced Options Menu in Windows Vista

Safe Mode in Windows 7

The steps to boot a Windows 7 system into Safe Mode are similar to those of Windows Vista:

  1. Remove any peripherals from your computer
  2. Restart your computer
  3. Press the F8 key before the Windows 7 logo appears.If you have more than 1 operating system installed on the same computer, use the arrows keys to navigate and select which operating system you want to boot into Safe Mode.
  4. Select Safe Mode using the arrows keys and press Enter
  5. If prompted to do, login as an administrator
Related text  How to get free stuff on amazon

Advanced Options Menu in Windows 7

Advanced Options Menu in Windows 7

Safe Mode in Windows 8, 8.1 and Windows 10

For Windows 8 or Windows 10 to boot into Safe Mode, follow these steps if you can boot into Windows:

  1. Restart the computer
  2. Press F8 or Shift + F8 during the boot, but before the Windows logo appears

If F8 or Shift + F8 doesn’t work, go to Windows 8 – F8 key not working or follow the alternative instructions below:

  1. Boot into Windows
  2. Press the Windows and R keys to open Run
  3. Type msconfig
  4. Click the Boot Tab
  5. At the Boot options section, check the Safe Boot checkbox and the Minimal checkbox
  6. Click OK
  7. Restart the computer. If prompted by the System Configuration window, click Restart – not Exit without Restart.Boot options menu in Windows

    Boot options menu in Windows

Another method is the combination of Shift and Restart keys at the login window:

  1. Boot into Windows until the login screen appears, but do not login as a user. If you don’t have a login screen showing, boot into the system and click on Settings
  2. Press the Power button
  3. While holding the Shift key, click Restart
  4. At the Choose an option screen, select Troubleshoot
  5. Select Advanced options
  6. Select Startup Settings
  7. Click Restart
  8. Your computer may restart and open the Startup Settings screen automatically
  9. Press the F4 key to boot into Safe Mode. For the other 2 options of Safe Mode, press F5 to boot into Safe Mode with Networking or press F6 to boot into Safe Mode with Command Prompt

Windows Startup Settings screen

Windows Startup Settings screen

It is also possible to use the installation CD/DVD to boot into Safe Mode:

  1. Insert the disc in the optical drive
  2. Reboot the system
  3. Press any key to boot from the CD/DVD
  4. Choose a keyboard layout
  5. Click Repair your computer
  6. Click Troubleshoot > Advanced options > Startup Settings
  7. Click Restart
  8. The computer should restart with the Startup Settings screen automatically
  9. Press F4 to boot into Safe Mode. Press F5 to boot into Safe Mode with Networking. Press F6 to boot into Safe Mode with Command Prompt.

Windows 8 Setup Screen

Windows 8 Setup Screen

Diagnostic tools in Safe Mode

You can run various diagnostic tools in Safe Mode.

System Restore

  1. Boot into Safe Mode
  2. Go to Start
  3. Click All Programs
  4. Go to Accessories
  5. Click System Tools
  6. Click System Restore
  7. Enter the administrator password, if you are prompted to do so

For more details on System Restore, follow our guide Windows System Restore.

Device Manager

Follow these instructions on how to open and edit configuration in Device Manager while in Safe Mode:

  1. Boot your Windows into Safe Mode
  2. Click Start
  3. Click Control Panel
  4. Click System and Maintenance
  5. Click Device Manager
  6. Enter an administrator password, if prompted to do so

Device Manager in Windows Vista

Device Manager in Windows Vista

You can use Device Manager and edit configurations only if you are logged in as an administrator. Changes that you do under a non-administrative account will apply to that user only.

Event Viewer

Follow these instructions on how to open Event Viewer while in Safe Mode:

  1. Boot into Safe Mode
  2. Click Start
  3. Click Control Panel
  4. Click System and Maintenance
  5. Click Administrative Tools
  6. Double-click on Event Viewer

Command Prompt

Follow these instructions on how to open Command Prompt while in Safe Mode:

  1. Boot into Safe Mode
  2. Click Start
  3. Click All Programs
  4. Click Accessories
  5. Click Command Prompt

Command Prompt screen

Command Prompt screen

Troubleshoot

Safe Mode not working

If you can’t boot into Safe Mode, consider the following tips:

  • Check if you have a Keyboard Support USB option in BIOS. If so, make sure it’s Enabled not Disabled.
  • If you have a keyboard with F-lock functionality, make sure it’s Off

If the F keys don’t work to boot into Safe Mode even after following the above tips, you can also run msconfig from within Windows (you need to boot into Windows first):

  1. Boot into Windows
  2. Click Start
  3. Click Run
  4. Type msconfig
  5. Click OK
  6. Go to the Boot tab (or Boot.ini for Windows XP users)
  7. Check the Safe Boot checkbox (or the /SAFEBOOT for Windows XP users)
  8. Click OK
  9. Click Restart
  10. Wait for your Windows to automatically start in Safe Mode

Msconfig screen in Windows

Msconfig screen in Windows

Windows 8, 8.1 and 10 users can open Run by pressing the Windows and R keys.

If you can’t boot into Windows to run msconfig, you can use the original installation disc or Easy Recovery Essentials to run Command Prompt and run chkdsk and bootrec commands.

chkdsk and bootrec utilities will attempt to fix any issues found on your hard drive or during the booting process of your Windows. After that, you can try again to boot into Safe Mode.

For more information on chkdsk, read our guide: chkdsk. For more information on Bootrec, read our guide: Bootrec.

The instructions for Windows XP are:

  1. Insert the installation CD in the optical drive
  2. Restart your computer
  3. At the “Press any key” message, press any key to make sure you boot from the CD
  4. Press R at the Windows Options menu to open Recovery Console
  5. Enter the administrator password
  6. When Command Prompt appears, type this command:chkdsk C: /r

    Replace C: with the letter of the drive where Windows XP is installed

  7. Press Enter
  8. You can also run the equivalent of bootrec found in Vista, 7, 8 for Windows XP, the bootcfg:bootcfg /rebuild
  9. Press Enter
  10. When done, type exit, press Enter and restart the computer

Windows XP setup screen

Windows XP setup screen

The instructions for Windows Vista, 7, 8, 8.1 and 10 are:

  1. Insert the original installation disc
  2. Reboot your computer
  3. Press any key to boot from the installation media: CD, DVD or USB drive
  4. Click Repair your computer
  5. Select your operating system
  6. Click Command Prompt
  7. Run these commands in order and press Enter after each:chkdsk /r bootrec /FixBoot bootrec /FixMbr

Windows 7 setup screen

Windows 7 setup screen

If you don’t have an original installation disc, you can run Command Prompt from Easy Recovery Essentials:

Windows 8, 10 – F8 key not working

If you use Windows 8 or Windows 8.1 and have a computer with UEFI/EFI, the F8 key would not work to boot into Safe Mode as Windows 8 and Windows 10 are optimized to boot very quickly.

To enable the F8 key, follow these steps:

  1. Open the Command Prompt
  2. If you’re logged into Windows, click to run it as an administrator
  3. Type this command:bcdedit /set bootmenupolicy legacy
  4. Press Enter
  5. A success message should appear:The operation completed successfully.
  6. Restart your computer

Bcdedit utility results screen

Bcdedit utility results screen

If you can’t boot into Windows to run Command Prompt, you can open it from the installation disc (CD/DVD for Windows 8 and Windows 10; USB drive for Windows 8.1):

  1. Insert the disc in the optical drive and restart the computer
  2. Press any key to boot from the disc
  3. Choose a keyboard layout
  4. Click Next
  5. Click Repair your computer
  6. Click Troubleshoot
  7. Click Advanced options
  8. Click Command Prompt

If you don’t have the installation disc, use Easy Recovery Essentials to have access to Command Prompt:

More Information

Support Links

Applicable Systems

This Windows-related knowledgebase article applies to the following operating systems:

  • Windows XP (all editions)
  • Windows Vista (all editions)
  • Windows 7 (all editions)
  • Windows 8 (all editions)
  • Windows 8.1 (all editions)
  • Windows 10 (all editions)
  • Windows Server 2003 (all editions)
  • Windows Server 2008 (all editions)
  • Windows Server 2012 (all editions)

Propose an edit

1. Booting with System Configuration

Possibly the easiest method to boot your system into Safe Mode is to use the tool called System Configuration. Most users know this tool by the name: msconfig.exe

RUN - msconfig

Furthermore, the fastest way to launch the tool is by pressing the Windows and R keys simultaneously on your keyboard. That command will open the Run window. When the window opens, you just need to type in msconfig.exe in the text field and press OK.

Alternatively, you can also use Cortana to open the System Configuration tool for you. You can do this by entering the words “system configuration” into the search field in your taskbar. Click on the System Configuration shortcut, and when a new window opens, just click on the Boot tab.

There, you’ll see an option that says “Safe Boot,” click on it, and then tap OK. The system will tell you that you need to reboot your computer, however, if you still have some work do to, you can exit without restarting, and go back to your business.

The next time you restart your PC, the system will boot itself into Safe Mode. When your PC is in Safe Mode, Microsoft Edge doesn’t work. Luckily, you can still use the Internet Explorer if you need to browse around the web.

2. The Restart and Shift Combination

Another widely-used way of getting into Safe mode is through the use of the Restart and Shift combination. First, you need to open your Start Menu, click the Power button and then press and hold Shift+Restart for a couple of seconds.

What’s more, you can also use this combination from your Sign In screen. When Windows boots, press and hold the Shift button, click Power, and then tap the Restart button. Once the system reboots, it will give you three options:

  • Continue
  • Troubleshoot
  • Turn Off your PC

Select the Troubleshoot option. When you go to the next screen, pick the advanced options. Click on Startup Settings first, and then Restart your computer. After the system reboots, you just need to press F4 to enable the Safe Mode.

4. Booting from a Recovery Drive

By using the Recovery drive application, you can actually create a recovery drive that can boot your operating system. When you insert the Recovery Drive, the application will ask you to select a keyboard layout. Pick the one you want to use, and proceed.

Next, you’ll see a screen that says “Choose an option.” There, you’ll see the following options:

  • Continue (that will lead you to Windows 10)
  • Use another operating system (that allows you to use another installed version of Windows)
  • Troubleshoot (that allows you to see advanced options).

Naturally, you should click Troubleshoot, and as we mentioned in the section above, you need to follow the 2nd method from our list to boot into Safe Mode.

5. Using the W10 Installation Drive

If you have the Windows 10 Installation DVD, you can use it to boot the Safe Mode. Moreover, in case you don’t actually have it, you can always download the latest version of Windows, create your own installation DVD, and use it to boot your broken computer.

Once the installation environment loads, pick your desired language and keyboard layout. Then, just press Next to continue. A link that says “Repair your computer” will appear in the bottom left corner of your screen. You need to click on it in order to continue.

Then, click on the Troubleshoot option, which will take you to the Advanced Options screen. There, you’ll find the Command Prompt option. Click on it, wait for a few seconds to load, type “bcdedit /set safeboot minimal” in and then press Enter.

bcdedit /set safeboot minimal

After the Command Prompt informs you that the process was completed successfully, close it and click on Continue. After the computer reboots, your Operating System will boot into Safe mode on its own.

Safe Mode in Windows XP/Vista/7

To get into the Safe Mode in Windows XP, Vista or 7, re-boot the computer and then press and hold the “F8 Key” which will then bring up the “Windows Advanced Options Menu“. Scroll down to “Safe Mode” using the arrow keys and press Enter.

windows safe mode

Note that sometimes if you press and hold the F8 key, some computers will start to beep annoyingly, so in that case, simply hold the F8 key continuously during the boot up period.

If you are still not able to get into Safe Mode, you can try to kill the power on the computer to turn it off and then turn it back on. If Windows shuts down unexpectedly, it will usually bring up the Advanced Boot Options menu automatically. If that doesn’t work, you can read my previous post on getting into Safe Mode if F8 is not working. This method, however, requires you to be able to log into Windows in order to tell it to boot into safe mode on the next restart.

Related text  How to insert youtube video into powerpoint
Like this post? Please share to your friends: