How to enter bios windows 10 recently released version 2.0 of Kali Linux which Mike Danseglio like to demonstrate in our Security+  and Certified Ethical Hacking CEHv9 courses. Kali Linux easily fits onto a 32GB USB 3.0 drive and allows you to boot directly into an extremely powerful security (hacking?) system.

Mike quickly updated my Patriot USB stick for me, and I raced to test it on my laptop.

…and the USB stick was not recognized at boot.  (Insert frowning emoticon here).

What changed? It worked recently. Ah yes, I upgraded my laptop to Windows 10 for evaluation purposes. Might this be a cause? It turns out that in part, it was. After a little bit of research, I discovered that the symptoms are identical on Windows 8/8.1.

Once you implement Fast Boot in either Windows 8/8.1 or Windows 10, it becomes (almost) impossible to enter BIOS or UEFI setup.

I researched Lenovo keyboard options for entering BIOS/UEFI at power-on. BIOS/CMOS Setup suggest F1 on one model and Fn-F2 on the other. Both were supposed to accommodate the F12 key for an alternate Boot Menu. None of the combinations worked.

A little extra research yielded the following information from a Lenovo site.

After shutting down the Microsoft Windows 8/8.1 PC and turning the system back on, it is not possible to enter BIOS Setup (by pressing F1) or the Boot Menu (by pressing F12).

The above symptom is associated with, but not limited to, the following systems:

  • ThinkPad, ThinkCentre, ThinkStation, IdeaPad, IdeaCentre

You may also like:  Methods to Enable and Disable Remote Desktop Locally

Affected Systems (machine types, model types):

  • All models with Microsoft Windows 8/8.1 preload.
Related text  How to stop itching

System is configured with:

  • Microsoft Windows 8/8.1 (and I discovered Windows 10 as well)

By default, a Windows 8/8.1 shutdown is not a real shutdown. Instead, it is hybrid shutdown where contents of memory are saved to disk. This allows for a faster startup. However, turning on the PC after a hybrid shutdown does not allow for pressing F1 or F12 during startup.

There are several ways to enter Setup Utility (F1) or the Boot Menu (F12) on a Microsoft Windows 8/8.1 PC as explained below:

  1. Press and hold the Shift key while selecting the Shutdown option in Windows 8. This will make the PC perform a full shutdown instead of a hybrid shutdown. Then F1 or F12 can be pressed successfully during startup.
  2. Select Restart instead of Shutdown. Then F1 or F12 can be pressed successfully during startup.
  3. Disable the fast startup option in Control Panel -> Hardware and Sound -> Power Options -> Choose what the power buttons do.

These options didn’t work for me. I just could not get the keystrokes recognized fast enough. Not by holding them down, or poising to pounce on them at the appropriate splash screen.

Here is the solution that you should be using on faster machines, particularly for Windows 10 which boots remarkably faster than Windows 8/8.1.

Use the Windows 8/8.1 or Windows 10 setup utilities:

1. Open the Charm Bar

2. Click on Settings

3. Click on Change PC Settings or All Settings (Windows 10)

4. Navigate through the setup screens to Recovery and click on Advanced Startup >> Restart Now

Related text  How to care for hydrangeas


You will be rebooted into the RE environment. (Make sure you have saved and closed all your work before experimenting.)

5. Click on Troubleshoot

6. Click on Advanced Options

7. Click on UEFI Firmware Settings


8. Click on Restart

 Once you click on restart, your system will be rebooted into the CMOS setup/UEFI interface where you may change your settings, including the device boot sequence, recognition of legacy boot devices, fast boot mode or other elements that will enable you to boot to alternate devices.

Et Voila! I was able to alter the boot sequence and recognize my Kali USB boot device.

I look forward to seeing you in the classroom, or online!

Steven Fullmer Interface Technical Training Staff Instructor

Steve teaches PMP: Project Management Fundamentals and Professional Certification, Windows 7, Windows 8.1 and CompTIA classes in Phoenix, Arizona.

Subscribe to this author's posts feed via RSS

Like this post? Please share to your friends: